Motor: Motor Current Charts

PDF Icon Download as PDF

Selection Tables – Three Phase Motors

AC Motors – full load current tables (1450rpm approx.)
(provided as a guide to the selection of suitable MEM control gear). The tables are based on motors of approximately 1450rpm of average efficiency and power factor. Motors of higher speed usually take a lower current than that shown in the table; while motors of lower speed usually take higher current. Wide variations from these figures can arise, especially on single phase motors, and engineers should, whenever possible, determine the actual f.l.c from the motor rating plate in each case.

Single Phase Motors

MOTOR RATINGHPAPPROX. F.L.C. AT LINE VOLTAGE
110V AC220V AC240V AC
0.07 kW1/122.41.21.1
0.1 kW1/83.31.61.5
0.12 kW1/63.81.91.7
0.18 kW1/44.52.32.1
0.25 kW1/35.82.92.6
0.37 kW1/27.93.93.6
0.56 kW3/4115.55
0.75 kW1157.36.7
1.1 kW1.521109
1.5 kW2261312
2.2 kW3371917
3 kW4492422
3.7 kW5542725
4 kW5.5603027
5.5 kW7.5854138
7.5 kW101105550

Three Phase Motors

MOTOR RATINGHPAPPROX. F.L.C. AT LINE VOLTAGE
220V AC240V AC380V AC415V AC550V AC
0.1 kW1/80.70.60.40.40.3
0.12 kW1/610.90.50.50.3
0.18 kW1/41.31.20.80.70.4
0.25 kW1/31.61.50.90.90.6
0.37 kW1/22.52.31.41.30.8
0.56 kW3/43.12.81.81.61.1
0.75 kW13.53.221.81.4
1.1 kW1.554.52.82.61.9
1.5 kW26.45.83.73.42.6
2.2 kW39.58.75.553.5
3.0 kW4121176.54.7
3.7 kW51513886
4.0 kW5.51614986
5.5 kW7.5201912118
7.5 kW102725161511
9.3 kW12.53432201814
10 kW13.53734222015
11 kW154137232216
15 kW206450312821
18 kW256762393626
22 kW307470433930
30 kW409991575241
37 kW50130119756950
45 kW60147136867959
55 kW751831661059672
75 kW10023921913812595
90 kW125301269170156117
110 kW150350325205189142
130 kW175410389245224169
150 kW200505440278255192

PDF Icon Download as PDF

DISCLAIMER: The information on this page and the PDF is for information only and R&M Electrical Group Ltd can not be held liable for any information therein.