Now Available from R&M Fixings & Supports More…

For Tightening Taps Without Isolating The Water Supply

1. Sliding jaw locked in position to allow tightening/ removal of pipe union nut

2. Sliding jaw dropped to allow tightening of tap back nut with out having to turn off water supply or drain system.

• Slim design ensures maximum accessibility
• Adjustable handles give maximum leverage as well as enabling use of jaws at either end of wrench
• The sliding handle channel means the handle can be easily repositioned
• Flat head screwdriver fitting on reverse of jaws allow for quick and easy adjustment of the jaws
• Different jaws at either end of the wrench cover a wide range of nut sizes
• In the closed position the bottom half of the jaw acts as a stop when tightening/removing union nut

R&M Fixings & Supports is pleased to offer this great new product from Armeg.

• Impact resistant dust shield for durability

• Twin cutting blades for rapid cutting action & balance

• Adjustable width blades for maximum flexibility

• 40-203mm cutting diameter

• Cutting thickness 46mm

• Cutting materials; Veneer, Plywood, Wood Board, Plaster Board & Acrylic

Order Part No. AHC40-200
Spare Blades Order Part No. AHC10-200SB

THE QUICKEST WAY TO PRODUCE A SQUARE HOLE FOR AN ELECTRICAL BACK BOX JUST GOT EVEN QUICKER.

Not only can you drill a square hole in under 2 minutes, you can now minimise clean up time with the EBS round Dust Collection Shroud. There is no need for attaching a vacuum, the debris simply collects in the bottom of the shroud.

The Dust Collection unit now comes as standard with all EBS sets.

For more information or a quote on this product please contact us on
Tel: 023 8038 6800 Email: fixings@rm-electrical.com

Great New Product from R&M Fixings & Supports.

The Constructor Measuring wheel now stocked by R&M Fixings & Supports Ltd is the newest offering form Onsite Supplies UK.

This innovative product has a 3-fold mechanism which allows neat and tidy storage and with the bag that comes with the wheel it is easily transported around site.

Product Codes and Prices

RE9T150 – 150mm 3-fold Compact Folding Measuring Wheel c/w brake and bag.  £59.85

RE9T300 – 300mm Compact Folding Measuring Wheel c/w brake and bag.  £99.85

The Hounds for Heroes charity is set up to provide specially trained assistance dogs to injured and disabled men and women of both the UK armed forces and civilian emergency services.

Through this provision Hounds for Heroes aims are to provide help and practical support leading to an enhanced quality of life for their clients.

R&M Southampton has recently made a donation to “The First Annual Endal’s Walk”, a walk around the local area in tribute to Endal, the amazing assistance dog without whom Hounds For Heroes would never have been born.

“On behalf of Hounds for Heroes I would like to express our gratitude for your much appreciated support and backing at the recent Endal Walk held in aid of Hounds for Heroes and in doing so assisting us in our aims of placing assistance dogs with injured veterans and emergency service personnel. Your donation of the X Box really was the real crowd pleaser and the star competition of the day.”

Print Silver Fox Tie-on Cable Labels Through Any Standard Laser Printer!

R&M can now provide a wide range of professional labelling solutions to match your specific labelling requirements. From cores to cables choose from: Tie-on Cable Labels; Optical Fibre Flag Labels; Wrap-around Self-laminating Cable Labels; Heatshrink or Non-shrink Tubing for Cable & Wire marking and 2-part Labelling System.

For more information please view the PDF below.

R&M Cables Division is now offering a range on professional kit boxes including a large selection on cable accessories.

For more information or for further discounts on the prices below please contact us on  Tel: 0117 982 4402 or Email: cables@rm-electrical.com

CT1016-KIT – £69.00
1 x CT10-16 CRIMPER
10 x T10-6 / T10-8 / T10-10 / T16-6/ T16-8 / T16-10 / BS10 / BS16
5 x 16FRP / 25FRP
5 x 16SRP / 25SRP

CTI1.5-6CH KIT – £84.00
1 x CTI1.5-6 QUALITY CRIMP TOOL
400 x MIXED KIT OFF RED, YELLOW, BLUE – RINGS, BUTTSLICES, FEMALE RECEPTICALS FORK TERMINALS ETC.

BLT0.5-6 KIT – £86.80
1x BLT0.5-6 FERRULE CRIMPER
100 x 0.5/0.75/1.0/1.5/2.5/4/6MM FERRULES
100 x 0.5/0.75/1.0/1.5/2.5/4/6MM UN-FERRULES
100 x 0.5/0.75/1.0/1.5/2.5/4/6MM TWINS FERRULES

EL12309 KIT – £165.00
100 x 0-9/L/N/E TO SUIT 0.75-70MMSQ2 CABLE 6 DIFFERENT SIZE APPLICATOR TOOLS
1 x CA0-9 ADHESIVE LABLE HOLDER
2 x L1 L2 L3 STICKY LABLES

K65MARKER KIT – £112.00
100 x 0-9, A-Z, /, +, EARTH, FULL STOP, BLANK
50 x CS-8 (8WAY CARRIER STRIP)
50 x CS12 (12WAY CARRIER STRIP)

HS3.2-25 KIT – £45.00
5 x 170MM LENGHTS OF 3.2 -25MM BLACK/BLUE/GREY/BROWN/GY
2 x 170MM LENGHTS OF CLEAR IN 3.2-25MM

EARTH KIT – £36.00
2 x 4WAY BRASS EARTH BLOCK
1 x 8WAY BRASS EARTH BLOCK
3 x M20 EARTHING NUT (PIRANHA)
2 x M25 EARTHING NUT (PIRANHA)
5 x 20MM EARTH TAG, 5 X 25MM EARTH TAG
4 x M20 EARTH LEAD 150MM

R&M’s Oxford Branch invite you to their open day at Horspath Industrial Estate, OX4 2TZ, on Tuesday the 28th of June 2011!

Come along on the 28th to view Aurora Lightings’ fully equipped demonstration bus featuring their new range Low Energy Fire Protection Lamps.

• Refreshments
  Exclusive Product Previews
  and
  New Product Training

All available on the day!

Contact Rik Walecki at R&M Oxford today for more information on this exciting new event!
Rik.Walecki@rm-electrical.com 01865 395353

Remove Hazards and Protect Cables from Damage.

Untidy, disorganised Leads and cables at best cause clutter and are potentially highly dangerous. R&M’s range of cable management solutions solves the problem efficiently and inexpensively.

Our range of cable stands, hooks and protector ramps have been designed to take unsightly leads and cables and channel them in a safe and orderly manner, giving benefits for both site managers and workers.

Tower Cable Stand

The tower cable stand is height adjustable, fully portable, highly visible and very stable. Made from non-conductive Polypropylene, it can hold multiple leads, hoses or cables.

Multipurpose Cable Hook

A non-conductive, tough plastic cable hook that’s ideal for electrical leads, cables, hoses, etc. versatile design fits over doors, walls, ceilings, scaffolds or anything that’s handy.

Cable Protection Ramps

A versatile cable protection system for power cables, leads and hoses, suitable for both indoor and outdoor use. Non- skid, flip top protects 6 channels. Durable polyurethane construction can handle vehicular and pedestrian traffic.