R&M Fixings & Supports LTD are suppliers and stockists of all IHL Walraven Ltd products. Walraven are at the forefront of innovation in the passive fire industry.

R&M can offer Walravens comprehensive range of fully tested passive fire protection products and fire rated fixings all of which are designed to make things simple for the installer, save time on site and make it easy to comply with all regulations and best practise.

At the core of the range is the MKII Pacifyre® Sleeve, which is often copied but never matched. This product is the most comprehensively tested and has the widest range of applications currently available. TheMKII Pacifyre® a firm favourite with installers because of its high specification, ease of use and time saving qualities.

For more information please click here
Alternatively contact R&M Fixings on 023 8038 6800 or email fixings@rm-electrical.com

R&M are now stockists for the Lindapter Tunnel Segment Connector system (TSC) which provides an easy to fit system with structural integrity sympathetic to the specific load bearing requirements of the existing tunnel linings and segments.

The TSC systems has been developed and validated in conjunction with the underground Asset Engineers to provide a quick & safe method for securing secondary structural systems including heating & ventilation units, acoustic paneling, cladding and secondary lining systems, cable management systems.

All TSC systems are fully adjustable to suit any radial position throughout the network, and have been rigorously evaluated & tested to meet the performance criteria.

Users of the TSC systems should ensure the suitability of tunnel segments and ring bolts prior to use, and ensure that all adaptions are approved by the Asset Engineer.

The designer/specifier/installer must comply to London Underground standard 1-538 Assurance (formally E1008 A4) by submitting a design before commencing any work. Lindapter projects intellectual property with registered designs and patents.

For more information on any of these products please contact our fixings branch.

R&M Fixings & Supports Ltd is proud to continue being an Associate Member of the Construction Fixings Association in 2011. As an Associate Member of the CFA we have access to the wealth of technical data and support directly from our suppliers and via the association.

This enables us to contribute to the stated objectives of the Association. We undertake to provide:

• Products from CFA Members made to register Quality Assurance schemes
• Products with ETS – European Technical Approvals – for safety critical uses
• A wide range of products to satisfy all applications
• Technical support from trained staff
• Competent Installer Training
• On site testing service
• High service levels

For more information please see the CFA website.

The air distribution system for a quick, hassle-free installation.

The Domus Radial duct system is a revolutionary whole house air distribution system suitable for most property types and a wide variety of applications.

• The radial duct system is a clever plug and play application using a manifold (air distribution box) to service up to 12 rooms and semi-rigid duct running to each individual room. It can be used with either Mechanical Extract or Heat Recovery Ventilation options.

• The chosen ventilation system connects to the manifold through a single inlet spigot

• The manifold acts as an air distribution unit, each outlet supplying a different room ensuring an even airflow

• Flexible, semi-rigid plastic ducting is securely connected to the outlet and runs directly to each room

• The outlet plenum enables the fixing of a standard air valve connector

Suitable for use in new build or refurbishment projects and with a powerful in line fan or Heat Recovery unit, this system ensures a simple, quick and hassle free installation which saves time and money. The easy push fit joints and less fixings ensure no air leakage and the single duct run to each room results in significantly less cross talk noise for the homeowner.

Now Available from R&M Fixings & Supports

Wibe was the first producer of cable ladders in Sweden and has for more than 70 years been the market leader and foremost in the development of new products and systems.

There are over 5,000 items in Wibes product range and around 100 are ladders and trays. The remainder is made up to meet every possible requirement.

Features
• Low Sided Ladder
• Fast Fix Connection System
• Articulated joints enable bends, risers & droppers to be created on site
• Finishes Pre-Galv, HDG, Stainless Steel and Epoxy Coating
• Widths from 150 to 1000mm

Benefits
• Ideal where space restrictions exist
• No fishplates at joints, saving 8 nuts and bolts per joint
• Tees and bends can formed on site using coupler 22
• Easy to Install
• Excellent Values of Safe Working Load when compared to traditional high sided ladders

A New Service at R&M Fixings & Supports Ltd

Did you know that there is a way to build solar array supports cost effectively and efficiently?

R&M Fixings have joined forces with Sikla, who are a market leader in modular PV mounting systems and engineered solutions.

Sikla Solar is designed to be cost effective and easy to install and because it is based upon a traditional Strut profile, you are more than likely already familiar and ready to use it without any questions whether your application is a pitched roof, domestic install or an earth mounted Solar Park.

With over 40 years of experience on innovative bracketry solutions, adopting the Sikla Solar System will be a profitable move and you will benefit from:

• Long Lasting Corrosion Resistance
• Tested “High Corrosion Protected Surface”
• No bi-metal corrosion Maximum Productivity
• Time saving installation process with fewer components
• Simple handling, no loose parts
• Convenient installation aids Flexible Fastening Systems
• For all PV modules up to 50mm Thick
• Adjustable PV mounting clamps Design & Engineering Support
• CAD design & material call off
• Static Calculations
• Wind & Ballast data output
• On-site support

For Tightening Taps Without Isolating The Water Supply

1. Sliding jaw locked in position to allow tightening/ removal of pipe union nut

2. Sliding jaw dropped to allow tightening of tap back nut with out having to turn off water supply or drain system.

• Slim design ensures maximum accessibility
• Adjustable handles give maximum leverage as well as enabling use of jaws at either end of wrench
• The sliding handle channel means the handle can be easily repositioned
• Flat head screwdriver fitting on reverse of jaws allow for quick and easy adjustment of the jaws
• Different jaws at either end of the wrench cover a wide range of nut sizes
• In the closed position the bottom half of the jaw acts as a stop when tightening/removing union nut

R&M Fixings & Supports is pleased to offer this great new product from Armeg.

• Impact resistant dust shield for durability

• Twin cutting blades for rapid cutting action & balance

• Adjustable width blades for maximum flexibility

• 40-203mm cutting diameter

• Cutting thickness 46mm

• Cutting materials; Veneer, Plywood, Wood Board, Plaster Board & Acrylic

Order Part No. AHC40-200
Spare Blades Order Part No. AHC10-200SB

THE QUICKEST WAY TO PRODUCE A SQUARE HOLE FOR AN ELECTRICAL BACK BOX JUST GOT EVEN QUICKER.

Not only can you drill a square hole in under 2 minutes, you can now minimise clean up time with the EBS round Dust Collection Shroud. There is no need for attaching a vacuum, the debris simply collects in the bottom of the shroud.

The Dust Collection unit now comes as standard with all EBS sets.

For more information or a quote on this product please contact us on
Tel: 023 8038 6800 Email: fixings@rm-electrical.com

Have You Considered The Proven Alternative to Traditional Methods Of Installing Building Services?

R&M Fixings & Supports Ltd have joined forces with MEP Solutions, who are a market leader in modular mechanical and electrical services engineering and specialists in integrated prefabricated solutions to the construction and building services industries.

With over nine years’ experience in the construction industry, MEP Solutions Ltd is a market leader in the design, manufacture and installation of multi-service modules, incorporating pipework, ventilation ductwork and electrical containment systems.

Each unique module is designed from fully co-ordinated 3D models and manufactured under factory controlled conditions. Modules are then delivered to site on a just in time basis, thus reducing the number of on-site personnel, reducing waste and improving installation efficiency.

MEP Solutions has gained significant experience across all market sectors.
Prestigious projects completed to date include;

• Healthcare: Peterborough Hospital, Enniskillen Hospital, St Bartholomew’s

• Hospital, Glasgow Southern General Hospital.

• Commercial: Piccadilly Place, Bridgewater Place, Eldon Square, The Cube.

• Education: South Leicester College, Middlesbrough College, Dunoon Grammar School, Retford and St. Giles Schools.

Do you need 3D Co-ordination Services?
We are also able to offer our engineering and co-ordination expertise to provide fully co-ordinated 3D solutions to any project, including those to be installed in the traditional manner, using the latest market leading software applications.